12N14P
Kurchs 2207
Light, fast-spinning, instant response.
- KV rating
- 1800KV
- Operating voltage
- 4S-6S
- Max thrust
- 1.69kg
- Recommended prop
- 5 inch
Kurchs 2207 targets 5-inch racing and freestyle platforms with a 12N14P layout and a 22×8 mm stator. The 1800KV winding gives immediate throttle response for 4S–6S small FPV builds; bench testing used 5055 and 5045 props, so 5–6 inch airframes can be matched to the setup.
- 011800KV base version, matched to 5-inch racing and freestyle platforms.
- 0236 g motor weight for lightweight builds where end-of-arm inertia matters.
- 03Rated for 4S–6S; 1800KV with 5055 props tested to 1.69 kg peak thrust, while the catalogue maximum is 1.745 kg with 1960KV and 5055.
Custom KV, shaft length, cabling and housing finish · prototypes available
TECHNICAL DATA
Specifications
Factory nominal values. Confirm selection against prop, voltage and all-up weight in real use.
KV TEST DATA
KV variants, tested
Same structure, different winding. Switch KV to see bench data for that variant.
| No. | Throttle % | Voltage V | Current A | Thrust g | Power W | Efficiency g/W |
|---|---|---|---|---|---|---|
| 1 | 50% | 24 | 8.38 | 679 | 201.1 | 3.38 |
| 2 | 60% | 24 | 13.31 | 914 | 319.4 | 2.86 |
| 3 | 70% | 24 | 19.34 | 1169 | 464.2 | 2.52 |
| 4 | 80% | 24 | 26.24 | 1384 | 629.8 | 2.2 |
| 5 | 90% | 24 | 33.33 | 1587 | 799.9 | 1.98 |
| 6 | 100% | 24 | 39 | 1745 | 936 | 1.86 |
| Test prop 5045 | Throttle % | Voltage V | Current A | Thrust g | Power W | Efficiency g/W |
|---|---|---|---|---|---|---|
| 1 | 50% | 21 | 8.13 | 540 | 170.7 | 3.163 |
| 2 | 60% | 21 | 11.93 | 716 | 250.5 | 2.858 |
| 3 | 70% | 21 | 16.68 | 925 | 350.3 | 2.641 |
| 4 | 80% | 21 | 22.08 | 1114 | 463.7 | 2.403 |
| 5 | 90% | 21 | 28.75 | 1335 | 603.8 | 2.211 |
| 6 | 100% | 21 | 36.55 | 1544 | 767.6 | 2.012 |
| Test prop 5055 | Throttle % | Voltage V | Current A | Thrust g | Power W | Efficiency g/W |
|---|---|---|---|---|---|---|
| 1 | 60% | 21 | 14.13 | 830 | 296.7 | 2.797 |
| 2 | 70% | 21 | 20.15 | 1063 | 423.2 | 2.512 |
| 3 | 80% | 21 | 27.28 | 1277 | 572.9 | 2.229 |
Bench data from our factory; results vary with environment and power supply.
DIMENSIONS
Dimensions & structure
Engineering drawing of outline, mounting pattern and shaft length, used with the dimension table below for airframe structure and prop matching.

APPLICATION MATCH
Recommended platforms
Selection depends on all-up weight, prop size and mission. These are typical matches; final choice should be verified on the bench.
- Main power for 5-inch freestyle FPV
- Small cinewhoop and ducted platforms
- Lightweight power for portable aerial platforms
- 5-inch freestyle platforms
- Small FPV builds
To confirm prop, ESC and airframe matching, send us target thrust, prop model and voltage and our engineering team will advise on selection and prototyping.
Get a selection guideNEXT MOTOR
Kurchs 2812
For 7–10-inch long-endurance multirotors: 1100KV on 6S delivers smooth output; current testing uses 7-inch 7040 props.
