12N14P
Kurchs 2812
Smooth torque for long-endurance platforms.
- KV rating
- 1100KV
- Operating voltage
- 25.2V
- Max thrust
- 2.08kg
- Recommended prop
- 7–10 inch
Kurchs 2812 is built for 7–10-inch long-endurance multirotors on an 1100KV winding. The 12N14P layout and 6S power system favour cruise efficiency and sustained output; current bench testing uses 7040 props with roughly 2.08 kg peak thrust.
- 011100KV winding covering 7–10-inch long-endurance platforms.
- 02Suited to 6S platforms, helping mid-size airframes keep current and all-up weight in check.
- 0377 g motor; peak efficiency of 4.13 g/W in current testing.
Custom KV, shaft length, cabling and housing finish · prototypes available
TECHNICAL DATA
Specifications
Factory nominal values. Confirm selection against prop, voltage and all-up weight in real use.
KV TEST DATA
Test data for this KV
In-house bench test, recorded throttle step by throttle step.
| No. | Throttle % | Voltage V | Current A | Thrust g | RPM | Power W | Efficiency g/W |
|---|---|---|---|---|---|---|---|
| 1 | 40% | 25.36 | 3.804 | 398.39 | 10077.6 | 96.47 | 4.13 |
| 2 | 50% | 25.29 | 6.174 | 611.73 | 12348.4 | 156.14 | 3.92 |
| 3 | 60% | 25.20 | 9.013 | 838.56 | 14192.8 | 227.13 | 3.69 |
| 4 | 70% | 25.08 | 12.982 | 1113.48 | 16212.9 | 325.59 | 3.42 |
| 5 | 80% | 24.94 | 17.573 | 1385.71 | 17936.8 | 438.27 | 3.16 |
| 6 | 90% | 24.64 | 23.872 | 1716.71 | 19696.3 | 588.21 | 2.92 |
| 7 | 100% | 24.16 | 32.539 | 2082.78 | 21453.2 | 786.14 | 2.65 |
Bench data from our factory; results vary with environment and power supply.
DIMENSIONS
Dimensions & structure
Engineering drawing of outline, mounting pattern and shaft length, used with the dimension table below for airframe structure and prop matching.

APPLICATION MATCH
Recommended platforms
Selection depends on all-up weight, prop size and mission. These are typical matches; final choice should be verified on the bench.
- Mid-size FPV with 7–8-inch props
- Long-range FPV / freestyle
- Power for mid-size aerial multirotors
- Power solution for mid-size 6S airframes
- 1–2 kg payload multirotor
- Mid-size survey and inspection UAVs
To confirm prop, ESC and airframe matching, send us target thrust, prop model and voltage and our engineering team will advise on selection and prototyping.
Get a selection guideNEXT MOTOR
Kurchs 3110
For 5–7-inch lightweight aerial, micro-inspection and portable platforms: 1200KV gives direct response; current testing uses 7-inch 7040 props.
