Need help choosing or customising?Contact Us
KURCHS 4215

12N14P

Kurchs 4215

Stable torque for professional imaging.

KV rating
380KV
Operating voltage
33.6V
Max thrust
5.75kg
Recommended prop
13–15 inch

Kurchs 4215 targets 13–15-inch mid-large multirotors. The 520KV version was tested with GF1507 and GF1310 props, reaching 8.26 kg peak thrust and 8.64 g/W for that winding. The catalogue also lists 380/400/660KV; the range peaks at 10.46 g/W with 380KV and GF1507.

  • 01520KV winding covering 13–15-inch mid-large platforms.
  • 028.26 kg peak thrust on the bench.
  • 03520KV peaks at 8.64 g/W; the range peaks at 10.46 g/W with the 380KV version.
Download datasheet↓

Custom KV, shaft length, cabling and housing finish · prototypes available

TECHNICAL DATA

Specifications

Factory nominal values. Confirm selection against prop, voltage and all-up weight in real use.

ModelKurchs 4215
KV rating380KV
Operating voltage33.6V(8S LiPo)
Slots / poles12N14P
Max thrust5.75kg
Max power1977W
Max current62.47A
Peak efficiency10.46g/W
No-load current1.50A
Phase resistance46mΩ
Weight (with leads)223g
Shaft diameterØ5mm
Motor leads14# 42mm
Recommended prop13–15 inch

KV TEST DATA

KV variants, tested

Same structure, different winding. Switch KV to see bench data for that variant.

380KV test data 8 throttle steps · Test prop GF1507
No.Throttle %Voltage VCurrent AThrust gRPMPower WEfficiency g/WTemp °C
1 30% 33.55 1.38 484.94 2344.6 46.37 10.46 25
2 40% 33.46 4.12 1133.4 3402.1 137.69 8.23 25
3 50% 33.32 8.47 1829.98 4252 282.05 6.49 25
4 60% 33.07 15.94 2755.68 5173.9 527.1 5.23 25
5 70% 32.76 25.45 3656.91 5932.5 833.81 4.39 25
6 80% 32.41 37.26 4523.77 6502.4 1207.47 3.75 25
7 90% 32 50.86 5308.06 7055.5 1627.39 3.26 25
8 100% 31.64 62.47 5754.62 7172.8 1976.68 2.91 25
400KV test data 8 throttle steps · Test prop GF1507
No.Throttle %Voltage VCurrent AThrust gRPMPower WEfficiency g/W
1 30% 33.54 1.799 589.75 2389.2 60.34 9.77
2 40% 33.45 5.067 1277.48 3461.5 169.49 7.54
3 50% 33.31 9.998 2025.68 4297.1 333.03 6.08
4 60% 33.06 18.722 3095.31 5210.6 618.95 5
5 70% 32.76 29.174 3991.72 5946.8 955.74 4.18
6 80% 32.42 41.024 4784.58 6496.2 1330 3.6
7 90% 31.99 55.168 5487.72 6966.6 1764.82 3.11
8 100% 31.74 63.529 5745.3 7137.6 2016.41 2.85
520KV test data 16 throttle steps · Test prop GF1507 × 8 / GF1310 × 8
Test prop GF1310Throttle %Voltage VCurrent AThrust gRPMPower WEfficiency g/W
1 30% 33.6 2.873 762 3633 96.53 7.89
2 40% 33.56 7.658 1581 5170 257 6.15
3 50% 33.47 16.863 2714 6775 564.4 4.81
4 60% 33.37 28.004 3756 7958 934.49 4.02
5 70% 33.22 44.88 4970 9122 1490.91 3.33
6 80% 33.04 64.11 6049 10018 2118.19 2.86
7 90% 32.83 86.872 6965 10725 2852.01 2.44
8 100% 32.7 98.807 7243 10936 3230.99 2.24
Test prop GF1507Throttle %Voltage VCurrent AThrust gRPMPower WEfficiency g/W
1 30% 33.59 3.471 1007 3499 116.59 8.64
2 40% 33.54 9.306 2050 4947 312.12 6.57
3 50% 33.44 20.955 3547 6403 700.74 5.06
4 60% 33.29 36.885 5007 7521 1227.9 4.08
5 70% 33.12 55.621 6314 8375 1842.17 3.43
6 80% 32.92 78.477 7443 9024 2583.46 2.88
7 90% 32.69 103.363 8208 9401 3378.94 2.43
8 100% 32.59 113.599 8260 9430 3702.19 2.23
660KV test data 15 throttle steps · Test prop GF1310
No.Throttle %Voltage VCurrent AThrust gRPMPower WEfficiency g/W
1 30% 33.73 7.775 1466.63 5337.2 262.25 5.59
2 40% 33.46 16.734 2549.12 6933.1 559.92 4.55
3 50% 33.07 29.613 3678.18 8270.5 979.3 3.76
4 60% 32.64 43.816 4555.31 9294 1430.15 3.19
5 70% 32.08 61.581 5468.85 10123.6 1975.52 2.77
6 80% 31.47 80.224 6197.84 10721 2524.65 2.45
7 90% 30.67 103.081 6819.73 11259.9 3161.49 2.16
8 30% 25.36 5.341 908.99 4263.8 135.45 6.71
9 40% 25.21 10.383 1503.19 5417.9 261.76 5.74
10 50% 24.97 18.409 2263.79 6552 459.67 4.92
11 60% 24.65 29.129 3066.04 7564.7 718.03 4.27
12 70% 24.26 41.969 3800.57 8450.2 1018.17 3.73
13 80% 23.83 55.549 4443.97 9114.7 1323.73 3.36
14 90% 23.33 71.212 5028.71 9746.6 1661.38 3.03
15 100% 22.67 90.741 5644.42 10295.2 2057.1 2.74

Bench data from our factory; results vary with environment and power supply.

DIMENSIONS

Dimensions & structure

Engineering drawing of outline, mounting pattern and shaft length, used with the dimension table below for airframe structure and prop matching.

Kurchs 4215 outline drawing
Outline drawing

APPLICATION MATCH

Recommended platforms

Selection depends on all-up weight, prop size and mission. These are typical matches; final choice should be verified on the bench.

To confirm prop, ESC and airframe matching, send us target thrust, prop model and voltage and our engineering team will advise on selection and prototyping.

Get a selection guide

NEXT MOTOR

Kurchs 4220

Suited to 13–15-inch long-endurance industrial multirotors; the 350KV version emphasises low-speed torque and sustained output, tested with 15-inch props.

Next model→

Get more information

Sign up for selection guides, product updates and offers.

Follow us