12N14P
Kurchs 4220
Sustained lift for longer missions.
- KV rating
- 350KV
- Operating voltage
- 33.6V
- Max thrust
- 6.25kg
- Recommended prop
- 13–15 inch
Kurchs 4220 is built for 13–15-inch long-endurance industrial multirotors. The 350KV version uses a 279 g motor and 12N14P layout, testing to 6.25 kg peak thrust on 15-inch 1507 props. The catalogue also lists 400KV and 500KV configurations, with the range reaching 9.992 kg peak thrust and 2898.8 W peak test power.
- 01350KV low-speed torque winding for 13–15-inch props.
- 02350KV with 1507 props tested to 6.25 kg; the range maximum is 9.992 kg with 400KV and 1655 props.
- 03350KV peaks at 10.33 g/W; the range peaks at 10.87 g/W with 400KV.
Custom KV, shaft length, cabling and housing finish · prototypes available
TECHNICAL DATA
Specifications
Factory nominal values. Confirm selection against prop, voltage and all-up weight in real use.
KV TEST DATA
KV variants, tested
Same structure, different winding. Switch KV to see bench data for that variant.
| No. | Throttle % | Voltage V | Current A | Thrust g | RPM | Power W | Efficiency g/W | Temp °C |
|---|---|---|---|---|---|---|---|---|
| 1 | 30% | 33.51 | 1.792 | 620.21 | 2290.5 | 60.05 | 10.33 | 25 |
| 2 | 40% | 33.4 | 4.941 | 1324.29 | 3316.2 | 165.03 | 8.02 | 25 |
| 3 | 50% | 33.24 | 9.824 | 2111.14 | 4166.3 | 326.55 | 6.46 | 25 |
| 4 | 60% | 32.98 | 17.886 | 3120.33 | 5064.1 | 589.88 | 5.29 | 25 |
| 5 | 70% | 32.66 | 28.073 | 4171.34 | 5824.3 | 916.86 | 4.55 | 25 |
| 6 | 80% | 32.37 | 40.18 | 5092.01 | 6500.4 | 1300.63 | 3.92 | 25 |
| 7 | 90% | 31.99 | 54.557 | 5807.78 | 7076.7 | 1745.28 | 3.33 | 25 |
| 8 | 100% | 31.69 | 65.175 | 6245.32 | 7316.5 | 2065.4 | 3.02 | 25 |
| No. | Throttle % | Voltage V | Current A | Thrust g | RPM | Power W | Efficiency g/W | Temp °C |
|---|---|---|---|---|---|---|---|---|
| 1 | 10% | 24.73 | 1.86 | 500 | 1725.9 | 46 | 10.87 | 25 |
| 2 | 20% | 24.69 | 4.79 | 1140 | 2537.1 | 118.27 | 9.64 | 25 |
| 3 | 30% | 24.63 | 9.94 | 1984 | 3319.8 | 244.82 | 8.1 | 25 |
| 4 | 40% | 24.53 | 17.21 | 3036 | 4047.8 | 422.16 | 7.19 | 25 |
| 5 | 50% | 24.42 | 25.84 | 4008 | 4625.4 | 631.01 | 6.35 | 25 |
| 6 | 60% | 24.24 | 40.26 | 5392 | 5314.9 | 975.9 | 5.53 | 25 |
| 7 | 70% | 24.02 | 56.16 | 6750 | 5884.4 | 1348.96 | 5 | 25 |
| 8 | 80% | 23.77 | 73.94 | 7898 | 6388.7 | 1757.55 | 4.49 | 25 |
| 9 | 90% | 23.48 | 94.65 | 9162 | 6826.8 | 2222.38 | 4.12 | 25 |
| 10 | 100% | 23.23 | 111.23 | 9992 | 7124.5 | 2583.87 | 3.87 | 25 |
| No. | Throttle % | Voltage V | Current A | Thrust g | RPM | Power W | Efficiency g/W | Temp °C |
|---|---|---|---|---|---|---|---|---|
| 1 | 60% | 40 | 19.11 | 3721 | 6627 | 759.6 | 4.9 | 25 |
| 2 | 70% | 40 | 28.29 | 4806 | 7538 | 1120.6 | 4.3 | 25 |
| 3 | 80% | 40 | 40.65 | 6080 | 8381 | 1602 | 3.8 | 25 |
| 4 | 90% | 40 | 55.54 | 7316 | 9116 | 2176.1 | 3.4 | 25 |
| 5 | 100% | 40 | 74.56 | 8204 | 9806 | 2898.8 | 2.8 | 25 |
Bench data from our factory; results vary with environment and power supply.
DIMENSIONS
Dimensions & structure
Engineering drawing of outline, mounting pattern and shaft length, used with the dimension table below for airframe structure and prop matching.

APPLICATION MATCH
Recommended platforms
Selection depends on all-up weight, prop size and mission. These are typical matches; final choice should be verified on the bench.
- Mid-size multirotors with 15–17-inch props
- 6–10 kg survey and inspection UAVs
- Long-range FPV / freestyle
- VTOL fixed-wing
- Mid-size cinema aerial platform
- Auxiliary power for small and mid-size agricultural UAVs
To confirm prop, ESC and airframe matching, send us target thrust, prop model and voltage and our engineering team will advise on selection and prototyping.
Get a selection guideNEXT MOTOR
Kurchs 4230
For 17–18-inch large-prop, 6S high-payload platforms: 450KV delivers low-speed torque with 3200 W rated max power.
