12N14P
Kurchs 4320
Steady operation on demanding flight paths.
- KV rating
- 350KV
- Operating voltage
- 33.6V
- Max thrust
- 6.25kg
- Recommended prop
- 13–18 inch
Kurchs 4320 targets 13–18-inch long-endurance large multirotors. The 350KV version uses a 279 g motor and 12N14P layout, testing to 6.25 kg peak thrust on 15-inch 1507 props. The catalogue also lists a 420KV version; the range peaks at 7.456 kg. The 13–18-inch span is indicative — final setup still needs validating against prop and payload.
- 01350KV low-speed winding across the indicative 13–18-inch range.
- 02350KV peaks at 6.25 kg; the range maximum is 7.456 kg on 420KV with 1507 props.
- 0312N14P layout for continuous missions and demanding flight paths.
Custom KV, shaft length, cabling and housing finish · prototypes available
TECHNICAL DATA
Specifications
Factory nominal values. Confirm selection against prop, voltage and all-up weight in real use.
KV TEST DATA
KV variants, tested
Same structure, different winding. Switch KV to see bench data for that variant.
| No. | Throttle % | Voltage V | Current A | Thrust g | RPM | Power W | Efficiency g/W | Temp °C |
|---|---|---|---|---|---|---|---|---|
| 1 | 30% | 33.51 | 1.792 | 620.21 | 2290.5 | 60.05 | 10.33 | 25 |
| 2 | 40% | 33.4 | 4.941 | 1324.29 | 3316.2 | 165.03 | 8.02 | 25 |
| 3 | 50% | 33.24 | 9.824 | 2111.14 | 4166.3 | 326.55 | 6.46 | 25 |
| 4 | 60% | 32.98 | 17.886 | 3120.33 | 5064.1 | 589.88 | 5.29 | 25 |
| 5 | 70% | 32.66 | 28.073 | 4171.34 | 5824.3 | 916.86 | 4.55 | 25 |
| 6 | 80% | 32.37 | 40.18 | 5092.01 | 6500.4 | 1300.63 | 3.92 | 25 |
| 7 | 90% | 31.99 | 54.557 | 5807.78 | 7076.7 | 1745.28 | 3.33 | 25 |
| 8 | 100% | 31.69 | 65.175 | 6245.32 | 7316.5 | 2065.4 | 3.02 | 25 |
| Test prop 1310 | Throttle % | Voltage V | Current A | Thrust g | RPM | Power W | Efficiency g/W | Temp °C |
|---|---|---|---|---|---|---|---|---|
| 1 | 40% | 33.78 | 6.102 | 1279.33 | 4974.5 | 206.13 | 6.21 | 25 |
| 2 | 50% | 33.65 | 10.509 | 1935.71 | 6059.3 | 353.63 | 5.47 | 25 |
| 3 | 60% | 33.45 | 16.848 | 2720.52 | 7143.8 | 563.57 | 4.83 | 25 |
| 4 | 70% | 33.22 | 24.48 | 3481.29 | 8115.9 | 813.23 | 4.28 | 25 |
| 5 | 80% | 32.94 | 33.925 | 4268.85 | 8984.7 | 1117.49 | 3.82 | 25 |
| 6 | 90% | 32.59 | 44.974 | 5043.34 | 9791.9 | 1465.7 | 3.44 | 25 |
| 7 | 100% | 32.12 | 60.052 | 5993.71 | 10588.8 | 1928.87 | 3.11 | 25 |
| Test prop 1507 | Throttle % | Voltage V | Current A | Thrust g | RPM | Power W | Efficiency g/W | Temp °C |
|---|---|---|---|---|---|---|---|---|
| 1 | 40% | 33.74 | 8.276 | 1891.1 | 4699.3 | 279.23 | 6.77 | 25 |
| 2 | 50% | 33.55 | 14.595 | 2810.95 | 5737 | 489.66 | 5.74 | 25 |
| 3 | 60% | 33.29 | 23.128 | 3773.7 | 6712.3 | 769.93 | 4.9 | 25 |
| 4 | 70% | 32.99 | 33.217 | 4690.37 | 7562.3 | 1095.83 | 4.28 | 25 |
| 5 | 80% | 32.62 | 44.998 | 5576.36 | 8335.3 | 1467.83 | 3.8 | 25 |
| 6 | 90% | 32.18 | 59.137 | 6518.47 | 8990.9 | 1903.03 | 3.43 | 25 |
| 7 | 100% | 31.58 | 77.366 | 7456.63 | 9702.5 | 2443.22 | 3.05 | 25 |
Bench data from our factory; results vary with environment and power supply.
DIMENSIONS
Dimensions & structure
Engineering drawing of outline, mounting pattern and shaft length, used with the dimension table below for airframe structure and prop matching.

APPLICATION MATCH
Recommended platforms
Selection depends on all-up weight, prop size and mission. These are typical matches; final choice should be verified on the bench.
- Large multirotors with 15–17-inch props
- 8–12 kg survey and inspection UAVs
- Long-endurance aerial / relay platforms
- VTOL fixed-wing
- Main power for small and mid-size agricultural UAVs
- Mid-size cinema aerial platform
To confirm prop, ESC and airframe matching, send us target thrust, prop model and voltage and our engineering team will advise on selection and prototyping.
Get a selection guideNEXT MOTOR
Kurchs 4715
For 13–15-inch X-Class and heavy-payload inspection platforms: base versions are 350KV, 400KV and 430KV on 8S, with the 430KV tested to 7.95 kg peak thrust.
